Print from http://www.friginox.com/froid/Default.asp
Refrigeration > Blast chillers/freezers

Blast chillers/freezers

A range of more than 60 models of blast chiller / freezers: reliability, performances, i-Chilling electronic control with self-adapting intelligent chilling, Multi-Point Frigiprobe, easy use and maintenance, according to the quality and safety standards.

THE RANGES

Blast chiller / freezers on feet

Combined blast chiller / freezers on feet - "RC / RC iC" range
Combined blast chiller / freezers on feet TRC 15-1
Combined blast chiller / freezer on feet
TRC 15-15 A iC
  •   combined use:
    - blast freezing +63°C to -18°C core/cycle of maxi 4h30
  • - blast chilling +63°C to +10°C core/cycle of maxi 110 min 
  •  i-Chilling electronic control with self-adapting intelligent chilling (i-Chilling models), electronic control with automatic monitoring (Frispeed Plus models) or electromechanical control (EM model) 
  • standard Multi-Point Frigiprobe on all i-Chilling and Frispeed Plus models (except on model with electromechanical control - Frigiprobe not adaptable) 
  • allows GN 1/1 trays and containers (not supplied) - from 3 to 36 levels maxi (depending on models) 
  • with housed unit or without unit (depending on models) 
  • 304 stainless steel external finish and inside
Blast chillers on feet - "RR / RR iC" range
 RR 50 A iC
Blast chiller on feet RR 50 A iC

 

  •  blast chilling +63°C to +10°C core/cycle of maxi 110 min
  •  i-Chilling electronic control with self-adapting intelligent chilling (i-Chilling models) or electronic control with automatic monitoring (Frispeed Plus models)
  •  standard Multi-Point Frigiprobe on all i-Chilling and Frispeed Plus models
  •  allows GN 1/1 trays and containers (not supplied) - from 3 to 14 levels (depending on models)
  •  with housed unit or without unit (depending on models)
  •  304 stainless steel external finish and inside
  •  NF Hygiène Alimentaire label (models with housed unit)

 

Blast freezers on feet - "SR / SR iC" range
Blast freeze SR 7 A iC
Blast freezer on feet SR 7 A iC
  •  combined use:
    - blast freezing +63°C to -18°C core/cycle of maxi 4h30
    - blast chilling +63°C to +10°C core/cycle of maxi 110 min 
  •  i-Chilling electronic control with self-adapting intelligent chilling (i-Chilling models) or electronic control with automatic monitoring (Frispeed Plus model)
  • standard Multi-Point Frigiprobe on all i-Chilling and Frispeed Plus models
  • allows GN 1/1 trays and containers (not supplied) - from 2 to 14 levels (depending on models)
  • with housed unit or without unit (depending on models) 
  • 304 stainless steel external finish and inside 
  • NF Hygiène Alimentaire label (models with housed unit)

Built-in blast chiller / freezers

Built-in combined blast chiller / freezers - "RC / RC iC" range
Built-in combined blast chiller / freezers
Built-in combined blast chiller / freezer
RC 15-7 A ENC iC
  •  combined use:
     - blast freezing +63°C to -18°C core/cycle of maxi 4h30
     - blast chilling +63°C to +10°C core/cycle of maxi 110 min 
  •  i-Chilling electronic control with self-adapting intelligent chilling (i-Chilling model) or electronic control with automatic monitoring (Frispeed Plus model)
  • standard Multi-Point Frigiprobe
  • allows GN 1/1 trays and containers (not supplied) - 7 levels max.
  • with housed unit
  • 304 stainless steel external finish and inside 
  • can be fully built-in under table or work top
  • rise on 4 mini-casters

Combined Blast chiller / Cabinet

Combined Blast chiller / Cabinet Duo 25-900 A iC
Combined blast chiller / conservation cabinet
Duo 25-900 A iC
  •  ideal compact system for refrigeration link:2 functions in the same equipment
  •  1 small door for blast chilling
  •  1 small door or 1 small door and 1 door (depending on models) for conservation of the cooled products
  •  2 independent condensing units (on models with housed unit) - Also versions without unit
  •  2 independent electronic controls
  •  modular and dismantable by module or by element (depending on models) 
  •  304 stainless steel external finish and inside

 

PARTICULARITIES FOR BLAST CHILLING COMPARTMENT

  •  blast chilling +63°C to +10°C core/cycle of maxi 110 min
  •  i-Chilling electronic control with self-adapting intelligent chilling (i-Chilling model) or electronic control with automatic monitoring (Frispeed Plus model)
  •  standard Multi-Point Frigiprobe
  •  allows GN 1/1 trays and containers (not supplied)

 

PARTICULARITIES FOR CONSERVATION COMPARTMENT

  •  positive temperatures +1°C/+10°C
  •  GN 2/1 trays
  •  fan-driven cold
  •  electronic control with digital display
  •  automatic re-evaporation of the de-icing water

 

Special blast chiller / freezers for combined oven loaders and trolleys

Special Blast Chillers for Combined Oven Loaders and Trolleys - "RR iC" range

 

  •  blast chilling +63°C to +10°C core/cycle of maxi 110 min 
  •  i-Chilling electronic control with self-adapting intelligent chilling 
  •  ProgramCycle board standard on RR 65c Plus iC model 
  •  standard Multi-Point Frigiprobe
  •  depending on models, allows:
  •  1 loader, 6 or 10 levels GN 1/1 of combined and convection ovens, FRIGINOX or ROSINOX Grandes Cuisines (direct transfer oven / blast chiller of the loader on loading trolley - loading trolley and loader not supplied)
  •  1 loader, 6 or 10 levels GN 1/1 of combined and convection ovens, Rational / Frima type (loading trolley and loader not supplied)
  •  1 trolley, 20 levels GN 1/1 of combined and convection ovens, Rational / Frima and Küpperbusch type (loading trolley not supplied) - casters remaining external finish the blast chiller
  •  with housed unit or without unit (depending on models) 
  •  304 stainless steel external finish and inside
Special Blast Freezers for Combined Oven Loaders and Trolleys - "SR iC" range
Special Blast Freezers for Combined Oven Loaders a
Special blast freezer for combined oven
loaders and trolleys
SR 65cS Plus iC
  • combined use:
  • - blast freezing +63°C to -18°C core/cycle of maxi 4h30
     blast chilling +63°C to +10°C core/cycle of maxi 110 min
  • i-Chilling electronic control with self-adapting intelligent chilling 
  • ProgramCycle board standard on SR 65cS Plus iC model
  • standard Multi-Point Frigiprobe
  •  depending on models, allows:
    - 1 loader, 6 or 10 levels GN 1/1 of combined and convection ovens, FRIGINOX or ROSINOX Grandes Cuisines (direct transfer oven / blast chiller of the loader on loading trolley - loading trolley and loader not supplied)
    -  1 loader, 6 or 10 levels GN 1/1 of combined and convection ovens, Rational / Frima type (loading trolley and loader not supplied)
    1 trolley, 20 levels GN 1/1 of combined and convection ovens,
    Rational / Frima and Küpperbusch type (loading trolley not supplied) - casters remaining external finish the blast chiller
    - with housed unit or without unit (depending on models) 
    - 304 stainless steel external finish and inside

Combined Ultracompact roll-in units

Combined UltraCompact Roll-in units - "UC iC" range
Combined UltraCompact Roll-in units UC 3
Combined UltraCompact roll-in unit UC 3

Product "Plus points"

  •  Smaller overall floor dimensions
  •  Larger flexibility in use

Thanks to the 258 possible combinations, there is an adequate solution to meet all your requirements. Ask for your own combined UltraCompact unit.
3 combined unit models: 1, 2 or 3 modules. Each module is fully independent and available in 6 versions:

  •  blast chilling 110 minutes (with housed unit),
  •  blast chilling 110 minutes (without condensing unit),
  •  blast chilling 85 minutes (without condensing unit),
  •  combined: blast chilling / freezing (without condensing unit),
  •  conservation with positive temperatures +1 °C/+10 °C (with housed unit),
  •  conservation with positive temperatures +1 °C/+10 °C (without condensing unit)

The position of each module (left, middle, right - depending on combined unit model) is defined on your request.
Each module can receive one ladder type trolley:

  •  GN 1/1 (530 x 325) or
  •  600 x 400 (special trolley for combined UltraCompact units)

Delivery of the combined UltraCompact roll-in units
UC 1: equipment supplied assembled
UC 2: equipment supplied assembled or in different modules
UC 3: equipment supplied in different modules

 

Roll-in blast chilling / freezing modules

  •  blast chilling +63°C to +10°C core:
  •  per cycle of maxi 110 min (UR iC, URS iC and USS iC modules)
  •  per cycle of maxi 85 min (URXS module)
  •  blast freezing +63°C to -18°C core/cycle of maxi 4h30 (combined used for the USS iC module)
  •  i-Chilling electronic control with self-adapting intelligent chilling
  •  ProgramCycle board standard
  •  standard Multi-Point Frigiprobe
  •  304 stainless steel external finish and inside

Roll-in positive temperature conservation modules

  •  positive temperatures +1°C/+10°C
  •  304 stainless steel external finish and inside

 


 

Roll-in blast chiller / freezers

Combined Roll-in Blast Chiller / Freezers - "RC / RC iC" range
Combined Roll-in Blast Chiller / Freezers RC 80-22
Combined roll-in blast chiller / freezer
RC 80-22 S iC
  •  combined use:
    - blast freezing +63°C to -18°C core/cycle of maxi 4h30
    - blast chilling +63°C to +10°C core/cycle of maxi 110 min
  • i-Chilling electronic control with self-adapting intelligent chilling (i-Chilling models) or electronic control with automatic monitoring (Frispeed Plus models)
  • ProgramCycle board standard on i-Chilling models • standard Multi-Point Frigiprobe
  • depending on models, allows*:
      - 1 or 2 trolleys, GN 1/1 - 22 levels (not supplied)
      - 1 trolley, GN 2/1 - 22 levels (not supplied) 
    * for different size trolleys, contact us
  • with housed unit or without unit (depending on models)
  • 304 stainless steel external finish and inside

 

Roll-in Blast Chillers - "RR / RRX iC" range
Roll-in Blast Chillers RR 2 FS-160 iC
Roll-in bast chiller RR 2 FS-160 iC
  • blast chilling +63°C to +10°C core:
    - per cycle of maxi 110 min (RR models)
    - per cycle of maxi 85 min (RRX models)
  • i-Chilling electronic control with self-adapting intelligent chilling
  • ProgramCycle board standard
  • standard Multi-Point Frigiprobe
  • depending on models, allows*:
    - 1, 2, 3, 4 or 6 trolleys, GN 1/1 - 22 levels (not supplied)
    - 1, 2 or 3 trolleys, GN 2/1 - 22 levels (not supplied)
    * for different size trolleys, contact us
  • with housed unit or without unit (depending on models)
  • 304 stainless steel external finish and inside
Roll-in Blast Freezers - "SR iC" range
Roll-in blast freezer SR 6S iC
Roll-in Blast Freezers SR 6S iC

 

  • combined use:
    - blast freezing +63°C to -18°C core/cycle of maxi 4h30
    - blast chilling +63°C to +10°C core/cycle of maxi 110 min
  • i-Chilling electronic control with self-adapting intelligent chilling
  • ProgramCycle board standard
  • standard Multi-Point Frigiprobe
  • depending on models, allows*:
    - 1, 2, 3, 4 or 6 trolleys, GN 1/1 - 22 levels (not supplied)
    - 1, 2 or 3 trolleys, GN 2/1 - 22 levels (not supplied)
    * for different size trolleys, contact us
  • without unit
  • 304 stainless steel external finish and inside

 

Remote condensing units for roll-in blast chiller / freezers

Remote Condensing Units for Roll-in Blast Chiller / Freezers - "F" and "C" series
  • air-cooled condenser
  • standard setting
      - ambient temperature 32°C
      - about 15 metres distance between equipment and condensing unit
      - about 4 metres height difference between equipment and condensing unit
  • assembled and wired components
  • crankcase heater, HP/LP pressure switches, "pump down" control
  • hand valve on the receiver liquid start
  • liquid receiver, drier filter and sight glass
  • not included:
      - refrigerant pipes, tubes insulation and fixings
      - R404A refrigerant

"F" series

  • for installation sheltered from water
  • hermetic compressor or Scroll hermetic compressor (depending on models)
  • lockable disconnect switch (depending on models)
  • electrical box to integrate in the blast chiller / freezer or integrated in the condensing unit (depending on models)

"C" series

  • with bodywork for external installation
  • hermetic or semi-hermetic compressor (depending on models)
  • condensing pressure control by HP pressure switch or speed variator on condenser fan (depending on models)
  • electrical box for the power, the control and protection of the unit
  • main disconnect switch
  • particularities, depending on models: differential pressure switch, oil separator with compressor return line, starting valve on the suction, 2 semi-hermetic compressors in parallel (each compressor comprising cylinder head fan - crankcase heater - differential pressure switch), starting valve on the suction, suction manifold with filter element and hand valve, oil separator with compressor return line, receiver and oil level regulator

 Documentation request